Wall Panel Molding and Reveals

Choose from PSI’s large selection of wall panel molding and reveals to bring your wall panels together beautifully. We offer reveals from a minimal 1/16” width up to a bold 1” width. PSI Moldings are available in a standard clear anodized or black finish as well as durable custom colored powder-coated finishes.

Click the Systems Below for Technical Specifications and Drawings:

System 310

System 310 Specification
System 310 Detail Drawings – PDF | DWG

Minimal 1/16” wide reveal. Black color standard
Use vertically or horizontally
Progressively installed system
Used with #304 and #304a edge trim (black, clear anodized, or custom colors) or with optional #412C top cap
Used with #103L 90-degree and #103L 135-degree outside corners (black, clear anodized or custom colors)
Panels surfaces to be used include: High Pressure Laminates, Metal and Digital Graphic Laminates, Tack board and Marker board finishes, Wood Veneers, Decorative Resin, and TorZo™ Sustainable Surfaces

310 4-way

System 310

#310 EB System

#310EB Specification
#310EB Detail Drawings – PDF | DWG

¼” wide reveal created using rounded 3mm thick plastic edge banding
Use Vertically and Horizontally
Progressively installed system
Use edge banding color matched to panels to minimize the look of the panel joint or use a contrasting color to emphasize the panel joints
Used with #304 and #304a edge trim (black, clear anodized or custom color) or with optional #412C top cap
Used with #103L 90-degree and #103L 135-degree outside (corners black, clear anodized or custom color)
Panel Surfaces to be used include: High Pressure Laminates, Metal and Digital Graphic Laminates, and Marker Board Laminates.

310EB 3-way	Travis Math & Science 3-way contrasting color edge banding
310EB 4-way	Isle Wheatley School 3-way matching color edge banding

System 310EB

#310EB / #310 System

#310EB/#310 Specification

#310EB/#310 Detail Drawings – PDF | DWG

A dominate horizontal look with a ¼” wide reveal created with 3mm thick plastic panel edge banding on the horizontal panel edges. The vertical joint is a minimal 1/16″.
A strong horizontal line can be created with panel edge banding that contrasts in color with the panel face.
Panel reveal lines can be minimized using panel edge banding that matches the panel face.
Progressively installed system.
Used with #304 and #304a edge trim (black, clear anodized, or custom colors) or with optional #412C top cap.
Used with # 103L-90 degree or 103L-135 degree outside corners (black, clear anodized or custom colors)
Panel Surfaces to be used include: High pressure laminates, Metal and Digital Graphic laminates, and Marker board laminates.

System 310 EB/310 3-Way

310EB-310 Project

System 310EB/310

#312 System

#312 Specification
#312 Detail Drawings – PDF | DWG

Bold ½” wide recessed reveal. Black or clear anodized standard, custom colors available
Progressively installed system
Used with #304 and #304a edge trim (black, clear anodized or custom color) or with optional #412C top cap
Used with #103L 90-degree and #103L 135-degree outside corners (black, clear anodized or custom color)
Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces

312 4-way
312 with optional matching laminate insert	312 with optional contrasting laminate insert

System 312

#312/310 System

#312/310 Specification
#312/310 Detail Drawings – PDF | DWG

Strong Horizontal Lines with ½” wide recessed reveal (black, clear anodized or custom color) running horizontally and minimal 1/16” reveal running vertically.
Progressively installed system
Used with #304 and #304a edge trim (black, clear anodized or custom color) or with optional #412C top cap
Used with #103 L 90-degree and 135–degree corners (Black, Clear Anodized or custom color)
Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces

312 / 310

Santa Fe High School

System 312/310

#314 System

#314 Specification
#314 Detail Drawings – PDF | DWG

Narrow 1/4” wide concave radiused reveal at horizontal and vertical panel joints
Standard PVC edge banding in Black or Platinum
Optional contrasting or matching edge banding colors available
Progressively installed system
Choice of 1/2” wide #304 or 3/8” wide #604 edge trim
Choice of radiused #103 or square edged #603 outside corner trim
Optional 404WC chair rail top trim available for wainscot installations
Trim molding color choices include Black, Clear Anodize or a variety of Custom Colors
Panel Surfaces to include: High Pressure Laminates, Metal Laminates, Digital Graphic Laminates, Marker Board, Tack Board, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces

314 4-Way

System 314

#410 System

#410 Specification
#410 Detail Drawings – PDF | DWG

1/2” Wide snap on battens that cover the panel edges. Black, clear anodized or custom color)
A non-progressively installed system (individual panels can be removed)
Used with #304 and #304a edge trim (Black, Clear Anodized or custom color) or with optional #412C top cap
Used with #103L 90-degree and #103L 135-degree outside corners (Black, Clear Anodized or custom color)
Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces

410 4-way

System 410

#412 System

#412 Specification
#412 Detail Drawings – PDF | DWG

At 1” wide this is our most pronounced molding system. It is a 2 piece system with a base piece that overlaps the panel edges and a face piece that snaps into the base. Available in black, clear anodized or custom colors.
A non-progressively installed system (panels can be individually removed).
Used with #304 and #304a edge trim (black, clear anodized, or custom colors) or with optional # 412C top cap.
Used with # 103L-90 degree or 103L-135 degree outside corners (black, clear anodized or custom colors).
Panel Surfaces to be used include: High pressure laminates, Metal and Digital Graphic laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin laminates, and TorZo™ Surfaces.
Can be used with an optional ½” wide laminate insert placed in the bottom of the recessed reveal of the molding base.

412	Plainview High School
412 With Matching Laminate Insert	412 With Contrasting Laminate Insert

System 412

#510 EB System

#510 EB Specification
#510EB Detail Drawings – PDF | DWG

¼” wide recessed reveal created by a rabbeted 3mm panel edge banding with a fine center fin. Fin is available in black, clear anodized or custom colors
Panel edge banding is standard in black and grey (to match clear anodized molding) but is available in custom colors to match or contrast with the panel surface.
Progressively installed system
Used with #304 and #304a edge trim (black, clear anodized or custom color) or with optional #412C top cap
Used with #103L 90-degree and #103L 135-degree outside corners (black, clear anodized or custom color)
Panel Surfaces to be used include: High Pressure Laminates, Metal and Digital Graphic Laminates, and Marker Board Laminates.

510EB

System 510 Temple College

System 510EB

#631 System

#631 Specification
#631 Detail Drawings – PDF | DWG

Tailored ¼” reveals accentuated with a sleek narrow single rib. Black, clear anodized or custom colors
Progressively installed system
Used with #610 and #610a edge trim (Black, Clear Anodized or custom color)
Used with # 620L 90-degree and #620L 135-degree outside corners (Black, Clear Anodized or custom color)
Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces

System 631

Banner Good Samaritan Hospital

System 631

#631 / #632 System

#631 / #632 Specification
#631 / #632 Detail Drawings – PDF | DWG

Narrow tailored ¼” horizontal reveal defined by a sleek single rib and a strong vertical ½” reveal defined by its double ribbed design. Black, clear anodized or custom colors
Progressively installed system
Used with #610 and #610a edge trim (Black, Clear Anodized or custom color)
Used with # 620L 90-degree and #610L 135-degree outside corners (black, clear anodized or custom color)
Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces

631 / 632 System

System 631 / 632

#632 System

#632 Specification
#632 Detail Drawings – PDF | DWG

Bold ½” wide reveals containing a paired ribbed design. Used vertically and horizontally to create strong modular look. Black, clear anodized or custom colors.
Progressively installed system
Used with #610 and #610a edge trim (Black, clear anodized or custom color)
Used with # 620L 90-degree and #620L 135-degree outside corners (black, clear anodized or custom color)
Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board, and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces

632

System 632

#632 / #631 System

#632 / #631 Specification
#632 / #631 Detail Drawings – PDF | DWG

Bold ½” wide horizontal reveal containing a paired ribbed design. Narrow ¼” vertical reveal with a sleek single rib.
Black, clear anodized and custom colors.
Progressively installed system
Used with #610 and #610a edge trim (Black, clear anodized or custom color)
Used with # 620L 90-degree and #620L 135-degree outside corners (black, clear anodized or custom color)
Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces

632 / 631

System 632 / 631

#103L Corner & #304 Edge Trim

The #103L corner and #304 edge trim sets are designed for maximum abuse resistance and installation ease of the PSI Wall Panel Systems
#304 & #304a edge trims have a ½” wide face that overlaps the panel edges. Available in black, clear anodized and custom colors
#103L-90 & #103L-135 are 90 and 135 degree outside corners with 1”x1” rounded corners. Available in black, clear anodized, and custom colors
Use with PSI Wall Panel System Types #310, #310EB, #312, #410, #412, and #510EB

103L90-304

103L Corner Santa Fe High School

103L Corner & 304 Edge Trim

#620L Corner and #610 Edge Trim

The #620L corner and #610 edge trim sets provide a refined look with a minimal coverage of the panel surfaces.
The #610 & #610a edge trims have a 3/8” wide face that overlaps the panel edges. Available in black, clear anodized and custom colors.
The #620L-90 & 620L-135 90 degree and 135 degree outside corners present a stepped appearance with a 3/8” wide face. Available in black, clear anodized and custom colors.
Use with PSI Wall Panel System Types # 631 and #632

620L90-620

620L90-620

System 620L Corner/ 610 Edge