Wall Panel Systems Specifications and Drawings
The PSI Wall Panel Systems specifications and associated drawings are based on the molding system chosen. Choose your molding system and download the correct specifications and drawings. The surface(s) required can be chosen inside the materials section of each wall panel systems specification.
System 310
System 310 Specification
System 310 Detail Drawings – PDF | DWG
- Minimal 1/16” wide reveal. Black color standard
- Use vertically or horizontally
- Progressively installed system
- Used with #304 and #304a edge trim (black, clear anodized, or custom colors) or with optional #412C top cap
- Used with #103L 90-degree and #103L 135-degree outside corners (black, clear anodized or custom colors)
- Panels surfaces to be used include: High Pressure Laminates, Metal and Digital Graphic Laminates, Tack board and Marker board finishes, Wood Veneers, Decorative Resin, and TorZo™ Sustainable Surfaces
![]() | ![]() 310 4-way |
System 310
Specification
Detail Drawings – PDF | DWG
#310 EB System
#310EB Specification
#310EB Detail Drawings – PDF | DWG
- ¼” wide reveal created using rounded 3mm thick plastic edge banding
- Use Vertically and Horizontally
- Progressively installed system
- Use edge banding color matched to panels to minimize the look of the panel joint or use a contrasting color to emphasize the panel joints
- Used with #304 and #304a edge trim (black, clear anodized or custom color) or with optional #412C top cap
- Used with #103L 90-degree and #103L 135-degree outside (corners black, clear anodized or custom color)
- Panel Surfaces to be used include: High Pressure Laminates, Metal and Digital Graphic Laminates, and Marker Board Laminates.
![]() 310EB 3-way | ![]() Travis Math & Science 3-way contrasting color edge banding |
![]() 310EB 4-way | ![]() Isle Wheatley School 3-way matching color edge banding |
System 310EB
Specification
Detail Drawings – PDF | DWG
#310EB / #310 System
#310EB/#310 Detail Drawings – PDF | DWG
- A dominate horizontal look with a ¼” wide reveal created with 3mm thick plastic panel edge banding on the horizontal panel edges. The vertical joint is a minimal 1/16″.
- A strong horizontal line can be created with panel edge banding that contrasts in color with the panel face.
- Panel reveal lines can be minimized using panel edge banding that matches the panel face.
- Progressively installed system.
- Used with #304 and #304a edge trim (black, clear anodized, or custom colors) or with optional #412C top cap.
- Used with # 103L-90 degree or 103L-135 degree outside corners (black, clear anodized or custom colors)
- Panel Surfaces to be used include: High pressure laminates, Metal and Digital Graphic laminates, and Marker board laminates.
![]() System 310 EB/310 3-Way | ![]() 310EB-310 Project |
System 310EB/310
Specification
Detail Drawings – PDF | DWG
#312 System
#312 Specification
#312 Detail Drawings – PDF | DWG
- Bold ½” wide recessed reveal. Black or clear anodized standard, custom colors available
- Progressively installed system
- Used with #304 and #304a edge trim (black, clear anodized or custom color) or with optional #412C top cap
- Used with #103L 90-degree and #103L 135-degree outside corners (black, clear anodized or custom color)
- Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces
![]() 312 4-way | ![]() |
![]() 312 with optional matching laminate insert | ![]() 312 with optional contrasting laminate insert |
System 312
Specification
Detail Drawings – PDF | DWG
#312/310 System
#312/310 Specification
#312/310 Detail Drawings – PDF | DWG
- Strong Horizontal Lines with ½” wide recessed reveal (black, clear anodized or custom color) running horizontally and minimal 1/16” reveal running vertically.
- Progressively installed system
- Used with #304 and #304a edge trim (black, clear anodized or custom color) or with optional #412C top cap
- Used with #103 L 90-degree and 135–degree corners (Black, Clear Anodized or custom color)
- Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces
![]() 312 / 310 | ![]() Santa Fe High School |
System 312/310
Specification
Detail Drawings – PDF | DWG
#410 System
#410 Specification
#410 Detail Drawings – PDF | DWG
- 1/2” Wide snap on battens that cover the panel edges. Black, clear anodized or custom color)
- A non-progressively installed system (individual panels can be removed)
- Used with #304 and #304a edge trim (Black, Clear Anodized or custom color) or with optional #412C top cap
- Used with #103L 90-degree and #103L 135-degree outside corners (Black, Clear Anodized or custom color)
- Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces
![]() 410 4-way | ![]() |
System 410
Specification
Detail Drawings – PDF | DWG
#412 System
#412 Specification
#412 Detail Drawings – PDF | DWG
- At 1” wide this is our most pronounced molding system. It is a 2 piece system with a base piece that overlaps the panel edges and a face piece that snaps into the base. Available in black, clear anodized or custom colors.
- A non-progressively installed system (panels can be individually removed).
- Used with #304 and #304a edge trim (black, clear anodized, or custom colors) or with optional # 412C top cap.
- Used with # 103L-90 degree or 103L-135 degree outside corners (black, clear anodized or custom colors).
- Panel Surfaces to be used include: High pressure laminates, Metal and Digital Graphic laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin laminates, and TorZo™ Surfaces.
- Can be used with an optional ½” wide laminate insert placed in the bottom of the recessed reveal of the molding base.
![]() 412 | ![]() Plainview High School |
![]() 412 With Matching Laminate Insert | ![]() 412 With Contrasting Laminate Insert |
System 412
Specification
Detail Drawings – PDF | DWG
#510 EB System
#510 EB Specification
#510EB Detail Drawings – PDF | DWG
- ¼” wide recessed reveal created by a rabbeted 3mm panel edge banding with a fine center fin. Fin is available in black, clear anodized or custom colors
- Panel edge banding is standard in black and grey (to match clear anodized molding) but is available in custom colors to match or contrast with the panel surface.
- Progressively installed system
- Used with #304 and #304a edge trim (black, clear anodized or custom color) or with optional #412C top cap
- Used with #103L 90-degree and #103L 135-degree outside corners (black, clear anodized or custom color)
- Panel Surfaces to be used include: High Pressure Laminates, Metal and Digital Graphic Laminates, and Marker Board Laminates.
![]() 510EB | ![]() System 510 Temple College |
System 510EB
Specification
Detail Drawings – PDF | DWG
#631 System
#631 Specification
#631 Detail Drawings – PDF | DWG
- Tailored ¼” reveals accentuated with a sleek narrow single rib. Black, clear anodized or custom colors
- Progressively installed system
- Used with #610 and #610a edge trim (Black, Clear Anodized or custom color)
- Used with # 620L 90-degree and #620L 135-degree outside corners (Black, Clear Anodized or custom color)
- Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces
![]() System 631 | ![]() Banner Good Samaritan Hospital |

System 631
Specification
Detail Drawings – PDF | DWG
#631 / #632 System
#631 / #632 Specification
#631 / #632 Detail Drawings – PDF | DWG
- Narrow tailored ¼” horizontal reveal defined by a sleek single rib and a strong vertical ½” reveal defined by its double ribbed design. Black, clear anodized or custom colors
- Progressively installed system
- Used with #610 and #610a edge trim (Black, Clear Anodized or custom color)
- Used with # 620L 90-degree and #610L 135-degree outside corners (black, clear anodized or custom color)
- Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces
![]() 631 / 632 System |
System 631 / 632
Specification
Detail Drawings – PDF | DWG
#632 System
#632 Specification
#632 Detail Drawings – PDF | DWG
- Bold ½” wide reveals containing a paired ribbed design. Used vertically and horizontally to create strong modular look. Black, clear anodized or custom colors.
- Progressively installed system
- Used with #610 and #610a edge trim (Black, clear anodized or custom color)
- Used with # 620L 90-degree and #620L 135-degree outside corners (black, clear anodized or custom color)
- Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board, and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces
![]() 632 | ![]() |
System 632
Specification
Detail Drawings – PDF | DWG
#632 / #631 System
#632 / #631 Specification
#632 / #631 Detail Drawings – PDF | DWG
- Bold ½” wide horizontal reveal containing a paired ribbed design. Narrow ¼” vertical reveal with a sleek single rib.
- Black, clear anodized and custom colors.
- Progressively installed system
- Used with #610 and #610a edge trim (Black, clear anodized or custom color)
- Used with # 620L 90-degree and #620L 135-degree outside corners (black, clear anodized or custom color)
- Panel Surfaces to include: High Pressure Laminates, Metal and Digital Graphic Laminates, Marker board and Tack boards, Wood Veneers, Decorative Resin Laminates, and TorZo™ Surfaces
![]() 632 / 631 |
System 632 / 631
Specification
Detail Drawings – PDF | DWG
#103L Corner & #304 Edge Trim
- The #103L corner and #304 edge trim sets are designed for maximum abuse resistance and installation ease of the PSI Wall Panel Systems
- #304 & #304a edge trims have a ½” wide face that overlaps the panel edges. Available in black, clear anodized and custom colors
- #103L-90 & #103L-135 are 90 and 135 degree outside corners with 1”x1” rounded corners. Available in black, clear anodized, and custom colors
- Use with PSI Wall Panel System Types #310, #310EB, #312, #410, #412, and #510EB
![]() | ![]() |
#620L Corner and #610 Edge Trim
- The #620L corner and #610 edge trim sets provide a refined look with a minimal coverage of the panel surfaces.
- The #610 & #610a edge trims have a 3/8” wide face that overlaps the panel edges. Available in black, clear anodized and custom colors.
- The #620L-90 & 620L-135 90 degree and 135 degree outside corners present a stepped appearance with a 3/8” wide face. Available in black, clear anodized and custom colors.
- Use with PSI Wall Panel System Types # 631 and #632
![]() | ![]() 620L90-620 |